Established in 2017, Fingerjoint Enterprises is a quality and value-driven specialist electrical and mechanical service provider supported by knowledgeable, qualified and experienced technicians – all specialists in their fields.
Finger Joint Machines
South Africa's Premium Manufacturer
Established in 2017, Fingerjoint Enterprises is a quality and value-driven specialist electrical and mechanical service provider supported by knowledgeable, qualified and experienced technicians – all specialists in their fields.
Menu
Menu
Menu
The Finger Joint Plant
Typical Finger Joint Plant Components: 60 m³ / Shift | Timber specs 38mm x 114mm x 900mm (Can be custom manufactured to suit smaller or larger operational needs)
Can be built from 30m³ – 250m³/ Shift
Auto cross cuts
Consisting of Electro pneumatically control cross cuts machines with a 450 diameter.
60 teeth saw blade and a 2400 mm x 350 mm roller table both sides
Motor size 3 kw at 2850 Rpm
Batch Feeder to carry over conveyor
Consisting of one 14000 mm x 2200 mm x 900 mm high Chain conveyor driven by a 1.1 Kw geared motor with a 2200 mm x 900 mm live roller table, controlled by main Plc.
Carry over conveyor to 1st Profiler
Consisting of one 2400 mm x 1200 mm x 900 mm high seamless conveyor belt with a drive motor controlled by PLC.
Motor size 1.1 kw at 1490 Rpm
1st and 2nd Profiler (Clamping capacity from 300mm to 1200mm)
Consisting of Two profiler cutters with gluing applicators suitable for honeymoon glue
Two infeed roller tables of 1200 mm wide witch feed both cross and profile cutters, all controlled by main PLC
Spindle motor size 22 Kw at 2850 Rpm. Spindle speed +- 6000rpm
Cross cut motor size 5.5 Kw at 2850 Rpm
Infeed roller motor 0.55 Kw with a feed speed of 1 meter per second
Glue holding tanks and filter system
Glue Gear Pump to pump glue to the roller system
Cross table motor size 2.2 Kw VSD controlled
Clamping height Maximum = 228 mm
Controlled by VSD drives for speed control
HMI Display for fault identification and monitoring software
Carry over conveyor to Profiler 2
Carry over conveyor to Press feed conveyor
Consisting of one 2400 mm x 1200 mm x 900 mm high seamless conveyor belt with a drive motor controlled by PLC.
Motor size 1.1 kw at 1490 Rpm
Finger Jointing single action Press or Continual Beam Press
Press Capacity: From 19×50 to 76×228 mm
Hydraulic power pack Consists of a hydraulic pump, flow divider, Valve bank and Pressure Transducer for quick setup of product
Hydraulic power pack motor size 7.5 kw
Maximum Pressure: 20 MPA
Hydraulic feed motor with a variable speed control.
Press jointing cycle of ± 2.5 seconds per joint
Feed roller speed of ± 1 meter per second
Built in crosscut with a 3-kw motor
Measuring device and HMI recording
All controlled by a PLC
Kick out table after press A and B
Table A consists of one 6600mm x 350 mm x 900 mm high roller table with a pneumatic kick off device.